Basic Info.
Model NO.
,81102,81106,AXK80105,29416,29317,29417,29420,
Rolling Body
Roller Bearings
The Number of Rows
Single
Outer Dimension
Small and Medium-Sized (60-115mm)
Spherical
Non-Aligning Bearings
Load Direction
Thrust Bearing
Trademark
CNYM, HRB, LYC, ZWZ, C&U, NSK, SKF, TIMKEN, FAG
Transport Package
Barreled, Bagged, Boxed, Palletized or as Customer
Product Description
1.Cylindrical roller thrust bearings
Cylindrical roller thrust bearings are designed to accommodate heavy axial loads and impact loads. They must not be subjected to any radial load. The bearings are very stiff and require little axial space.Features and benefits
- Separable design
Shaft washer, housing washer, cylindrical roller and cage thrust assembly can be mounted separately. - Extended bearing service life
To prevent stress peaks, the roller ends are relieved slightly to modify the line contact between the raceway and rollers.
2.Needle roller thrust bearings
Needle roller thrust bearings are fitted with a form-stable cage to reliably retain and guide a large number of needle rollers. Needle roller thrust bearings provide a high degree of stiffness within a minimum axial space. In applications where the faces of adjacent machine components can serve as raceways, needle roller thrust bearings take up no more space than a conventional thrust washer.
Features and benefits
- Accommodate heavy axial loads and peak loads
The very small diameter deviation of the rollers within one assembly enables these bearings to accommodate heavy axial loads and peak loads. - Extended bearing service life
To prevent stress peaks, the roller ends are relieved slightly to modify the line contact between the raceway and rollers.
3.Tapered roller thrust bearings
Tapered roller thrust bearings are designed to accommodate heavy axial loads and peak loads. The bearings are very stiff and require little axial space.
Features and benefits
- Separable design
The shaft and housing washers and the roller and cage thrust assemblies of tapered roller thrust bearings with cages can be mounted separately. - Low friction
The optimized roller end design and surface finish on the flange promote lubricant film formation, resulting in lower friction. This also reduces frictional heat and flange wear. - Long service life
Depending on the design, crowned or logarithmic raceway profiles optimize the load distribution along the contact surfaces, reduce stress peaks at the roller ends, and reduce the sensitivity to misalignment compared with conventional straight raceway profiles. - Enhanced operational reliability
The surface finish on the contact surfaces on the rollers and raceways supports the formation of a hydrodynamic lubricant film. - High load carrying capacity
The rollers incorporated in SKF tapered roller thrust bearings are manufactured to such close dimensional and geometrical tolerances that they are practically identical. This provides optimal load distribution and enables the bearings to accommodate heavy axial loads.
4.Spherical roller thrust bearings
Spherical roller thrust bearings have specially designed raceways and asymmetrical rollers. The bearings can accommodate axial loads acting in one direction and simultaneously acting radial loads. The load is transmitted between the raceways via the rollers at an angle to the bearing axis, while the flange guides the rollers
Features and benefits
- High load carrying capacity
The large number of rollers, which have an optimum conformity with the washer raceways, enables the bearings to accommodate heavy axial and simultaneously acting radial loads. - Accommodate misalignment
SKF spherical roller thrust bearings are self-aligning and can accommodate misalignment (fig. 2). - Separable design
SKF spherical roller thrust bearings are separable, making it possible to mount and dismount the housing washer separately from the shaft washer and roller and cage assembly. In addition this facilitates maintenance inspections. - High speed capability
The cage designs and the optimum conformity of the rollers with the washer raceways make the bearings suitable for relatively high speeds. - Long service life
The special roller profile reduces edge stresses at the roller/raceway contact. - Low friction
The optimized roller end / flange contact keeps frictional heat at low level, even at high speeds.
| Designation | Principal dimensions | Basic load ratings | Speed ratings |
|---|
| | | dynamic | static | Reference speed | Limiting speed |
|---|
| | | | | | | | |
|---|
| 81102 TN | 15 | 28 | 9 | | 11.2 | 27 | 4 300 | 8 500 |
| K 81102 TN | 15 | 28 | | 3.5 | 11.2 | 27 | 4 300 | 8 500 |
| 81103 TN | 17 | 30 | 9 | | 12.2 | 31.5 | 4 300 | 8 500 |
| K 81103 TN | 17 | 30 | | 3.5 | 12.2 | 31.5 | 4 300 | 8 500 |
| 81104 TN | 20 | 35 | 10 | | 18.6 | 48 | 3 800 | 7 500 |
| K 81104 TN | 20 | 35 | | 4.5 | 18.6 | 48 | 3 800 | 7 500 |
| 81105 TN | 25 | 42 | 11 | | 25 | 69.5 | 3 200 | 6 300 |
| K 81105 TN | 25 | 42 | | 5 | 25 | 69.5 | 3 200 | 6 300 |
| 81106 TN | 30 | 47 | 11 | | 27 | 78 | 3 000 | 6 000 |
| 81206 TN | 30 | 52 | 16 | | 50 | 134 | 2 400 | 4 800 |
| 89306 TN | 30 | 60 | 18 | | 52 | 183 | 2 600 | 5 300 |
| K 81106 TN | 30 | 47 | | 5 | 27 | 78 | 3 000 | 6 000 |
| K 81206 TN | 30 | 52 | | 7.5 | 50 | 134 | 2 400 | 4 800 |
| K 89306 TN | 30 | 60 | | 5.5 | 52 | 183 | 2 600 | 5 300 |
| 81107 TN | 35 | 52 | 12 | | 29 | 93 | 2 800 | 5 600 |
| 81207 TN | 35 | 62 | 18 | | 62 | 190 | 2 000 | 4 000 |
| K 81107 TN | 35 | 52 | | 5 | 29 | 93 | 2 800 | 5 600 |
| K 81207 TN | 35 | 62 | | 7.5 | 62 | 190 | 2 000 | 4 000 |
| K 89307 TN | 35 | 68 | | 6 | 62 | 220 | 2 400 | 4 800 |
| 81108 TN | 40 | 60 | 13 | | 43 | 137 | 2 400 | 5 000 |
| 81208 TN | 40 | 68 | 19 | | 83 | 255 | 1 900 | 3 800 |
| 89308 TN | 40 | 78 | 22 | | 95 | 365 | 2 000 | 4 000 |
| K 81108 TN | 40 | 60 | | 6 | 43 | 137 | 2 400 | 5 000 |
| K 81208 TN | 40 | 68 | | 9 | 83 | 255 | 1 900 | 3 800 |
| Designation | Principal dimensions | Basic load ratings | Speed ratings |
|---|
| | | dynamic | static | Reference speed | Limiting speed |
|---|
| | | | | | | |
|---|
| AXK 0414 TN | 4 | 14 | 2 | 4.15 | 8.3 | 7 500 | 15 000 |
| AXK 0515 TN | 5 | 15 | 2 | 4.5 | 9.5 | 6 700 | 14 000 |
| AXK 0619 TN | 6 | 19 | 2 | 6.3 | 16 | 6 000 | 12 000 |
| AXK 0821 TN | 8 | 21 | 2 | 7.2 | 20 | 5 600 | 11 000 |
| AXK 1024 | 10 | 24 | 2 | 8.5 | 26 | 5 300 | 10 000 |
| AXW 10 | 10 | 24 | 2 | 8.5 | 26 | 5 300 | 10 000 |
| AXK 1226 | 12 | 26 | 2 | 9.15 | 30 | 5 000 | 10 000 |
| AXW 12 | 12 | 26 | 2 | 9.15 | 30 | 5 000 | 10 000 |
| AXK 1528 | 15 | 28 | 2 | 10.4 | 37.5 | 4 800 | 9 500 |
| AXW 15 | 15 | 28 | 2 | 10.4 | 37.5 | 4 800 | 9 500 |
| AXK 1730 | 17 | 30 | 2 | 11 | 40.5 | 4 500 | 9 500 |
| AXK 2035 | 20 | 35 | 2 | 12 | 47.5 | 4 300 | 8 500 |
| AXW 20 | 20 | 35 | 2 | 12 | 47.5 | 4 300 | 8 500 |
| AXK 2542 | 25 | 42 | 2 | 13.4 | 60 | 3 800 | 7 500 |
| AXW 25 | 25 | 42 | 2 | 13.4 | 60 | 3 800 | 7 500 |
| AXK 3047 | 30 | 47 | 2 | 15 | 72 | 3 600 | 7 000 |
| AXW 30 | 30 | 47 | 2 | 15 | 72 | 3 600 | 7 000 |
| AXK 3552 | 35 | 52 | 2 | 16.6 | 83 | 3 200 | 6 300 |
| AXW 35 | 35 | 52 | 2 | 16.6 | 83 | 3 200 | 6 300 |
| AXK 4060 | 40 | 60 | 3 | 25 | 114 | 2 800 | 5 600 |
| AXW 40 | 40 | 60 | 3 | 25 | 114 | 2 800 | 5 600 |
| AXK 4565 | 45 | 65 | 3 | 27 | 127 | 2 600 | 5 300 |
| AXW 45 | 45 | 65 | 3 | 27 | 127 | 2 600 | 5 300 |
| AXK 5070 | 50 | 70 | 3 | 28.5 | 143 | 2 400 | 5 000 |
| AXW 50 | 50 | 70 | 3 | 28.5 | 143 | 2 400 | 5 000 |
| AXK 5578 | 55 | 78 | 3 | 34.5 | 186 | 2 200 | 4 300 |
| AXK 6085 | 60 | 85 | 3 | 37.5 | 232 | 2 200 | 4 300 |
| AXK 6590 | 65 | 90 | 3 | 39 | 255 | 2 000 | 4 000 |
| AXK 7095 | 70 | 95 | 4 | 49 | 255 | 1 800 | 3 600 |
| AXK 75100 | 75 | 100 | 4 | 50 | 265 | 1 700 | 3 400 |
| Designation | Principal dimensions | Basic load ratings | Comparative load ratings | Industry reference |
|---|
| | | dynamic | static | dynamic | API | |
|---|
| | | | | | | | | |
|---|
| BFS-8054 | 203.2 | 419.1 | 92.075 | 3 450 | 12 500 | 1 200 | 4 627 | 273 | T811 |
| BFS-8028 | 228.6 | 482.6 | 104.775 | 4 400 | 16 000 | 1 553 | 5 989 | 354 | T911 |
| BFS-8023 A | 234.95 | 546.1 | 127 | 6 550 | 26 000 | 2 294 | 8 850 | 522 | T921 |
| BFS-8040 B | 234.95 | 546.1 | 127 | 6 400 | 25 500 | 2 230 | 8 603 | 508 | T921 |
| BFS-8033 | 279.4 | 603.25 | 136.53 | 6 800 | 25 500 | 2 418 | 9 326 | 551 | T1120 |
| BFS-8052 | 292.1 | 660.4 | 127 | 9 300 | 42 500 | 3 267 | 12 599 | 744 | T11500 |
| Designation | Principal dimensions | Basic load ratings | Speed ratings |
|---|
| | | dynamic | static | Reference speed | Limiting speed |
|---|
| | | | | | | |
|---|
| 29412 E | 60 | 130 | 42 | 390 | 915 | 2 800 | 5 000 |
| 29413 E | 65 | 140 | 45 | 455 | 1 080 | 2 600 | 4 800 |
| 29414 E | 70 | 150 | 48 | 520 | 1 250 | 2 400 | 4 300 |
| 29415 E | 75 | 160 | 51 | 600 | 1 430 | 2 400 | 4 000 |
| 29416 E | 80 | 170 | 54 | 670 | 1 630 | 2 200 | 3 800 |
| 29317 E | 85 | 150 | 39 | 380 | 1 060 | 2 400 | 4 000 |
| 29417 E | 85 | 180 | 58 | 735 | 1 800 | 2 000 | 3 600 |
| 29318 E | 90 | 155 | 39 | 400 | 1 080 | 2 400 | 4 000 |
| 29418 E | 90 | 190 | 60 | 815 | 2 000 | 1 900 | 3 400 |
| 29320 E | 100 | 170 | 42 | 465 | 1 290 | 2 200 | 3 600 |
| 29420 E | 100 | 210 | 67 | 980 | 2 500 | 1 700 | 3 000 |
| 29322 E | 110 | 190 | 48 | 610 | 1 730 | 1 900 | 3 200 |
| 29422 E | 110 | 230 | 73 | 1 180 | 3 000 | 1 600 | 2 800 |
| 29324 E | 120 | 210 | 54 | 765 | 2 120 | 1 700 | 2 800 |
| 29424 E | 120 | 250 | 78 | 1 370 | 3 450 | 1 500 | 2 600 |
| 29326 E | 130 | 225 | 58 | 865 | 2 500 | 1 600 | 2 600 |
| 29426 E | 130 | 270 | 85 | 1 560 | 4 050 | 1 300 | 2 400 |
| 29328 E | 140 | 240 | 60 | 980 | 2 850 | 1 500 | 2 600 |
| 29428 E | 140 | 280 | 85 | 1 630 | 4 300 | 1 300 | 2 400 |
| 29230 E | 150 | 215 | 39 | 408 | 1 600 | 1 800 | 2 800 |
| 29330 E | 150 | 250 | 60 | 1 000 | 2 850 | 1 500 | 2 400 |
| 29430 E | 150 | 300 | 90 | 1 860 | 5 100 | 1 200 | 2 200 |
| 29332 E | 160 | 270 | 67 | 1 180 | 3 450 | 1 300 | 2 200 |
| 29432 E | 160 | 320 | 95 | 2 080 | 5 600 | 1 100 | 2 000 |
| 29334 E | 170 | 280 | 67 | 1 200 | 3 550 | 1 300 | 2 200 |
| 29434 E | 170 | 340 | 103 | 2 360 | 6 550 | 1 100 | 1 900 |
| 29236 E | 180 | 250 | 42 | 495 | 2 040 | 1 600 | 2 600 |
| 29336 E | 180 | 300 | 73 | 1 430 | 4 300 | 1 200 | 2 000 |
| 29436 E | 180 | 360 | 109 | 2 600 | 7 350 | 1 000 | 1 800 |
| 29338 E | 190 | 320 | 78 | 1 630 | 4 750 | 1 100 | 1 900 |
1. Samples quantity: 1-10 PCS are available.
2. Free samples:
It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost.
3. It's better to start your order with Trade Assurance to get full protection for your samples order.
CUSTOMIZEDThe customized LOGO or drawing is acceptable for us.
MOQ1. MOQ:
10 PCS standard bearings.
2. MOQ: 1000 PCS customized your brand bearings.
OEM POLICY1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield.
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don't disclose any info.
Thank you very much for taking time to view our company's website. If you are interested in this product, please feel free to contact us. We are always here.
Address:
No. 110, Building 20, Shandong Heavy Truck Parts Logistics Center, 57 Lanxiang Road, Tianqiao District, Jinan City, Shandong Province, Jinan, Shandong, China
Business Type:
Trading Company
Business Range:
Industrial Equipment & Components
Company Introduction:
Jinan Zhongyi International Trading Co., Ltd is located in Tianqiao District Jinan City Shandong Province, which is one of the famous base of Chinese trucks and the truck parts suppliers center in China.
Our team is devoting ourselves to supply Chinese heavy duty trucks spare parts and construction machinery parts to overseas customers and friends. Our main product covers Sinotruk, Shacman(Shaanxi), Weichai, Dongfeng, FAW, Fast, CAMC, Foton, etc., more than 20000 models in total in the scope of truck and construction machinery parts.
With years of accumulation in parts field, the advantage of parts acquaintance and acknowledgement, reasonable price, reliable quality, professional and considerate service, we are growing fast and rapidly in recently years. Currently, we have built steady cooperation with customers from Russia, Middle East, Africa, Southeast Asia and North America. We could offer OEM parts service to our long and new customers, customizing parts and packing according to customers requirements and market needs.
Our team is united, passionate, creative and aspirant who is already and always here to provide all around service to our customers. We are sincerely looking forward to cooperate with you long and get a better future, and win together in the market
